6 Ways on How to Make Headphones Louder

In this article, we’re going to be talking about how to make headphones louder. When you plug in your headphones and hear a weak sound coming out of them, the easiest solution is to turn up your device’s volume.

However, if that doesn’t work or you want more options for making your headphones louder than just turning up the volume, then keep reading!

In any case, it’s important in order to get good results from these tips that you follow all instructions carefully. If not, then some of these steps may have no effect at all!

By following our advice, we hope that you will soon enjoy listening to music again without having to worry about hearing anything but the beat.

Here are 6 Ways to Make your Headphones Louder: 


1. Turn the volume up on your computer or device

It’s worth mentioning. Even if you don’t hear anything at a lower volume, your computer or device might be putting out too little power to drive the headphones loud enough for you to hear clearly.



2. Get a headphone amplifier

Get a headphone amplifierIf you want to listen to music on your headphones louder than they can manage by plugging into a computer, you’ll need an amplifier.

In addition to helping you get more power out of your device, this will let you customize the sound quality with equalizer settings and other options that are difficult or impossible with basic headphone jacks.



3. Use an equalizer to boost certain frequencies, such as bass

Use an equalizer to boost certain frequencies, such as bassAnother way to make your headphones louder is to use an equalizer, which allows you to boost certain frequencies.

While this can help if the low end isn’t making it through your headphones loud enough, beware of overdoing it with the bass because this could make other parts of what you’re listening to sound off-balance.

You’ll have better luck finding a happy medium with a graphic equalizer than trying to boost just one frequency band along the spectrum.

There are also software solutions such as Winamp that allow you to adjust EQ settings on the fly by sliding or clicking on sliders instead of tweaking a series of preset frequencies in their own interface panel.

The ability to control volume levels independently for various frequency bands and tracks.



4. Try using noise-canceling headphones instead of regular ones

If you’re listening to music in a noisy environment, you’ll usually want noise-canceling headphones to help drown out ambient sounds so that only the music comes through clearly.

The downside is that noise-canceling headphones often require an external power source because they have extra components dedicated to their cancellation process.

If you’re using them with only the battery in your device, though, then this can also drain it faster than if you were listening to regular headphones.

While airplane mode can help in both cases, some people report getting better sound quality when they use noise-canceling earphones as long as they don’t max out the volume dial on their players or devices and keep it at a more reasonable level.



5. Put your phone in airplane mode and turn off any other Bluetooth devices near you

Put your phone in airplane mode and turn off any other Bluetooth devices near you  The higher the signal strength is, the more power your device will put out for headphones. If you have a lot of devices around that are putting out signals (such as other Bluetooth audio or wireless devices in your area), this can sap away some of what’s supposed to go through your device.

Airplane mode will disable most of these signals automatically, and you’ll also be able to tell if any of them are still active by looking at how much battery power is being drained when they’re on versus off.

If there are none of these things draining your batteries or blocking airways, then it might just come down to the quality of your audio files themselves—low-quality music files won’t sound good no matter how loud they are, and high-quality ones will be more easily heard even at lower volumes.

By turning off your devices, if you get no sound from the headphone jack on your device, ensure that there isn’t an audio cable issue. Try pushing the plugin all the way into the port or wiggling it side to side a bit to make sure it’s seated well.



6. Buy new headphones that have more powerful drivers

If you’re still not getting enough volume despite trying everything else, then it’s time to upgrade your headphones.

Either invest in a new set with more powerful drivers or look for headphones with an integrated headphone amp or an external one that can be easily connected instead of hardwired into the device.

In most cases, if you’re looking to get better sound quality (especially with larger over-the-ear types), investing in on-ear and earbud-sized models will give you better sound quality than what you’ll find with smaller, lesser quality in-ear designs.

Read Also: Best Beyerdynamic Headphones for Gaming (Our Top 3 Picks)




In conclusion, to get the most out of your listening experience, you should turn up the volume on your computer or device. To make your headphones louder, you also want to consider a headphone amplifier and an equalizer that can boost certain frequencies like bass.

By buying new headphones with more powerful drivers, you will be able to enjoy the better sound quality.

If you’re having trouble finding good-sounding audio at home or work, investing in noise-canceling headphones might do the trick for any ambient noise interference. Remember these tips when it comes time for a new pair of cans!




Why is the volume in my headphones so low?

Why is the volume in my headphones so low


Headphones work just like tiny speakers, and the reason why they’re so powerful is that their diaphragm is small. A low volume setting indicates that not enough power is getting to your headphones for the sound to be audible and to make headphones louder.

The best solution is to increase the volume on your device before you plug in your earbuds. But if there’s a problem with the audio jack or cord, then taking them to an electronics store should fix it quickly and easily.

A few other quick fixes are as follows:

1) The device might need charging – both on portable devices and home stereos (plug it in).

2) Return any faulty parts, such as a loose headphone jack or faulty cable insulation.

How do you fix low sound on headphones?

How do you fix low sound on headphones


1)Low sound on headphones can be a result of wear and tear. If the person has had their earphones for less than six months, try using the other side of the wire for one week to see if that fixes the issue.

2)If it is not just an issue with one earpiece, then there might be something wrong with how they are plugged in (the wire can get ripped off or have too much slack).

Clean them out and put in new foam (Dissolve a few tablets of at least 10% hydrogen peroxide in 2 cups hot water.) Theoretically, you could also clean.

3)Finally, low audio could be due to dirt or wax build-up on the speakers themselves.


Why is my volume not working?


It’s possible a malfunction of the hardware, or it could just be that you’re accidentally covering the microphones with your hands.

There are also cases where the tone might not be compatible with your settings on sound. If none of these seem to be the issue, first try rebooting your device. If that doesn’t work, contact Apple for further assistance!


6 Ways on How to Make Headphones Louder Pin




Leave a Comment