Get rid of static noise in headphones by using these 7 simple methods we have outlined below.
Static noise is a common issue for headphones. This is due to the high levels of electricity that can create this type of interference with sound waves as they are transmitted through the wires.
With so many different types of headphones on the market, finding ones without static noise can be challenging.
This blog post will show you how to get rid of static noise by using six different methods so you can enjoy uninterrupted music, TV shows, or playing your video games.
Table of Contents
Clean the headphone jack with a cotton swab to get rid of static noise in the headphones
If you have a pair of headphones that you only use at home, your static problem may be due to a dirty headphone jack. Dust, dirt, and hair can get in the plug over time and cause issues with your audio signal.
As a first step in getting rid of static noise, clean the headphone jack on your device using a cotton swab or q-tip.
Simply wipe down the inside of the plug to remove any debris that could be causing issues with sound transmission. Using this method should take care of most static cases if you are primarily using your headphones at home.
Use a portable humidifier or vaporizer to introduce moisture into the air.
If you are using your headphones while traveling, then a portable humidifier or vaporizer can help get rid of static noise by introducing moisture into the air around your device.
The moisture adds to the conductivity of the air and prevents any static electricity from building up in your headphones.
There are many different types of humidifiers and vaporizers that work for this purpose. You want to ensure that they produce more steam than fog so it does not clog up your audio signal when trying to get rid of static noise.
Keep your headphones away from other electronics, such as laptops and smartphones.
Many electronic devices give off high levels of static electricity. If your headphones are sitting near other electronics, then you will probably experience issues with static noise.
The best way to avoid this is to keep your headphones stored in an area far away from other equipment that can interfere with the audio signal.
Try plugging your headphones into another device.
If you have tried everything else and are still experiencing issues with static in your headphones, try plugging them into a different device.
Many sound cards in computers support multiple input jacks. Try switching out the audio cables on your headphones and see if that fixes the problem, or try using another pair of headphones to see if it is an issue for only one specific brand/model of headphones.
In some cases, using an AC ground loop isolator can get rid of static noise. This device basically just eliminates any voltage spikes caused by differences in electrical grounds among various devices connected to your audio system.
Read Also: 6 Ways on How to Make Headphones Louder
Replace the cable for better sound quality & to get rid of static noise in the headphones
Finally, it may be time to consider replacing your audio cable. Over time the wires can get worn and cause static noise as they make contact with the jack in your device.
You don’t have to buy a replacement headphone jack because you could simply replace the audio cable connection between the headphones and your device.
Purchase anti-static spray to help get rid of static noise in your headphones
If you have tried some of the other methods to get rid of static noise in your headphones and are still having issues, you may need to purchase anti-static spray.
This type of spray coats the inside of your headphone jack with a non-conductive substance. This will act as an insulator so that any voltage spikes or other static electricity cannot build inside the device.
The spray should be used sparingly because it can cause condensation, which could interfere with sound quality if it gets too wet.
Avoid using extension cords when possible.
Even if you are not experiencing static noise while listening to music through your headphones, many listeners complain about reduced volume due to problems with extension wires.
Over time, extension cords can cause the wires to rise and fall as you move, creating a wavy pattern in the cable. This motion causes regular vibrations that are picked up by your headphones and transferred into sound. The listener hears these fluctuations as static noise.
Stay away from extension cords when possible, especially with stereo equipment or home entertainment centers. Consider purchasing some type of cordless audio system for other applications, such as using a wireless microphone instead of an old school mic stand (which also serves as an extension cord).
If you need to use an extension cord, try wrapping it in rubber bands, so the wire stays firmly in place on one side of the device.
Conclusion
Static noise in headphones is one of the most annoying problems that people can face. No matter how much you try to ignore it, static will drive you crazy and make listening to music a miserable experience.
If your phone or laptop has been at work for a while and is full of dust, this could also create static electricity, which causes the problem.
Thankfully there are many ways that you can get rid of this pain with some simple fixes we’ve outlined in this article. Do any of these methods sound like something you have already tried? Have any other ideas on getting rid of static noise in headphones? Let us know!
We would love to hear what helped you solve your pesky problem so others may benefit from hearing about it.